MR220507S02 Level and Flow-Rate Control (including PID Controller with Software) with Computer and Backup UPS

MR220507S02 Level and Flow-Rate Control (including PID Controller with Software) with Computer and Backup UPS Teaching Equipment Level Control Training Equipment Didactic Equipment

Introduction:

The process of flow rate and pressure control is a unit consisting of the process control of level and flow rate control.
The control is done by acting on a pneumatic valve.

Possible exercises by the apparatus:
Demonstration of proportional, integral, and derivative control of apparatus.
Demonstration of measuring instruments of level and flow rate.
Demonstration of tuning techniques of controllers.
Determination of dead time, response and characteristics of process.

Technical Parameters:
All Components are mounted on a framework of stainless steel with suitable AWG withstand the load of equipment and all components. A storage tank made in stainless steel with capacity of 41 liters and a constantlevel tank made with stainless steel with capacity of 21 liters are installed. A centrifugal pump made up of corrosion-resistant material with flow rate Q = 2.2 cubic meter per hour (m3/h) with Head of 11 meters is also supplied. A calibrated diaphragm is also installed.
▪ The apparatus is equipped with a compressor along with female valves of 1⁄4 inches for the requirement of compressed air 1.2 newton cubic meter per hour (Nm3 /h) @ 6.5 bar. ▪ The apparatus is equipped with tap water valve with 1⁄2 inches hose connector and a glass column wire height of 510 milli meter (mm). ▪ Differential pressure flow transmitter and differential pressure level with 3.5 to 21 milli ampere (mA) output signal are scope of standard supply.
▪ All valves are pneumatic made of stainless-steel material.
▪ The apparatus is equipped with electro pneumatic converters, 3.5 to 21 milli ampere (mA) / 0.1 to 1.1 bar
▪ PID controller, all necessary piping, valves, and safety control are included in the standard supply. ▪ A software is included for control and data acquisition.
Unit is supplied with handbook for experiments.