MR220507S03 Multi Process Control (including PID Controller with Software) with Computer and Backup UPS

MR220507S03 Multi Process Control (including PID Controller with Software) with Computer and Backup UPS Educational Equipment Process Control Trainer Vocational Training Equipment

Introduction:

The processes of flow rate, water level, temperature of water and fan speed individually or in cascade. The apparatus is a multi process control. The control is done by acting on a pneumatic valve.

Possible exercises by the apparatus:
Demonstration of proportional, integral, and derivative control of apparatus.
Demonstration of cascade control.
Demonstration of tuning techniques of controllers.
Determination of dead time, response and characteristics of process.

Technical Parameters:
All components are mounted on a framework of stainless steel with suitable AWG to withstand the load of equipment and all components. The apparatus is equipped with storage tank with capacity of 11 liters and supplied with heating element of 2000 Watts which is digitally controlled by a thermostat. Stirrer is installed with variable rpm 0-300. Column of borosilicate 3.3, capacity of 6 liters. Centrifugal pump is installed made up of corrosionresistant material flow rate Q = 2050 liter per hour (l/h) with head of 10 meter (m). Motor operated Air-cooled heat exchanger installed, which is kept cool by a fan and tachometer generator is also part of supply.

▪ A variable area flow transmitter-indicator with range of 0 to 320 liter per hour (l/h) and 3.5 to 21 milli ampere
(mA) output.
▪ The apparatus is equipped with electronic differential pressure transmitters with 3.5 to 21 milli ampere (mA)
output signal working in the range of 0 to 260 milli meter (mm) H2O.

▪ The apparatus is equipped with pneumatic control valves for pressure control in split range and flow rate control.
▪ The pneumatic converters, 3.5 to 21 milli ampere (mA) / 0.19 to 1.2 bar are installed.
▪ The apparatus is equipped with PID controller, all necessary piping, valves, and safety control. ▪ A software is included for control and data acquisition.
Unit is supplied with handbook for experiments.