MR123M Electro Hydraulic Trainer Teaching Equipment Technical Vocational Training Equipment and Simulator Electro Hydraulic Workbench I.Product Overview 1.1 Overview The MR123M electric hydraulic training bench is equipped with real hydraulic components, such as pumps, valves, actuators, etc., which can be flexibly installed on the operating panel. All joints use open and closed quick connectors at both ends, and allow students to build and test different hydraulic circuits by connecting these components. Through such a training bench, students can better understand the working principle of the hydraulic system and improve their practical skills. 1.2 Features (1) The system can be used to design hydraulic circuits and learn hydraulic control technology. (2) The T-slot aluminum platform enables quick connection of components (3) The equipment is made of a high-strength sheet metal frame, which is beautiful and durable; the bottom is equipped with universal wheels for easy movement. II.Performance Parameter Input power: single-phase three-wire 220V, 50Hz Dimensions: 1600*750*1700mm Weight: <240kg III.Components List and Detailed Introduction 3.1 Main Part Number Name 1 Frame 2 Basic components (integrated tool box, hydraulic station, oil pan) 3 Universal wheels 4 Operation panel 5 Power supply box 6 DC24 power supply box 7 Button box 8 Relay box 3.2 Hydraulic Components Number Name 1 4/2 way manual valve 2 4/2 way solenoid valve 3 4/3 way solenoid valve 4 Pilot pressure reducing valve 5 Pilot sequence valve 6 Pilot relief valve 7 Direct-acting relief valve 8 Speed regulating valve 9 Hydraulic control one-way valve 10 Travel valve 11 One-way valve 12 Throttle valve 13 Five-way valve 14 Ball valve 15 T-type three-way valve 16 Pressure relay 17 Double-acting cylinder 18 Pressure gauge 19 Travel switch 20 Capacitive sensor 21 Inductive sensor 22 Photoelectric sensor 3.3 Accessories Number Name Quantity 1 2mm electrical cable (red) 20 2 2mm electrical cable (black) 20 3 2mm electrical cable (yellow) 20 4 4mm electrical cable (yellow) 1 5 4mm electrical cable (blue) 1 6 Hex wrench 1 7 Tape 2 IV. Experiment List Experiment 1: Introduction to hydraulic station Experiment 2: 4/2 way manual valve operation experiment Experiment 3: 4/2 way solenoid valve operation experiment Experiment 4: 4/3 way solenoid valve operation experiment Experiment 5: Direct-acting overflow valve operation experiment Experiment 6: Pilot pressure reducing valve operation experiment Experiment 7: Speed regulating valve operation experiment Experiment 8: Hydraulic control check valve operation experiment Experiment 9: Study on the relationship between throttle valve opening and closing degree and pressure difference Experiment 10: Pressure relay operation experiment Experiment 11: Travel valve operation experiment Experiment 12: Pilot sequence valve operation experiment
