MR004M Pneumatic And Electro-Pneumatic Bench

MR004M Pneumatic And Electro-Pneumatic Bench Educational Equipment Vocational Training Equipment Electro Pneumatic Bench

Pneumatic and electro-pneumatic bench Double-sided mobile workstation allows the assembly and operation of the various components without the use of tools (components equipped with quick assembly system)
- 1* Rolling table dimension between length 1200 mm, height 1700 mm and depth 800 mm minimum.
- 1* extruded and adonized aluminum plate of dimension between 1080 mm length and 680 mm depth minimum with the possibility of fixing the electrical components on both sides.
- 2* cabinet with a minimum of four drawers and locks

- 1* cable guide
- 1 x power supply unit for mounting frame 220V AC- 24 VDC/ 4A minimum with minimum 6 outputs
- 1 x silent lubricated compressor for classroom use: protected by pressure switch and safety valve
- Supply voltage 230V/50HZ
- Operating pressure 7 bar minimum
- Suction flow rate 40 L/MIN minimum
- Tank volume 9 L minimum
- Outlet with pressure regulator, pressure gauge and quick coupler

Pre-actuator for manual and mechanical pressurization
-  2 push-button operated 3/2 NC spool valves
- 2 Push-button operated 3/2 NO dispensers
- 1 3/2 NC valve operated by emergency stop button
- 4 Distributors FC 3/2 NC roller-operated
- 2 NC 3/2 directional control valves operated by retractable roller

- 1 Switch operated 3/2 NC bistable valve
- 1 Push button operated 5/2 directional control valve
- 1 5/2-way valve with two-position selector switch
- 1 Closed center 5/3 valve operated by hook-in lever
Pneumatically operated pre-actuator
- 1 Pneumatically operated 3/2 NC monostable spool valve, 3/2 NC.
- 2 Pneumatically operated 5/2 monostable spool valves
- 2 Pneumatically operated 5/2 bistable valves